How can you replace the seat of a shower faucet?

There are several reasons why you may need to change the seat of your shower faucet. Very often this is caused by a build up of waste. This causes the seal to fail, which in turn causes water leakage. In this case, there is only one solution. It is the replacement of this spoiled accessory. In this article you will find some tips on how to change the seat of a shower faucet.

Checking the condition of the tap's seals

You must first be sure that the seat of your shower faucet is defective before thinking of changing it. To do this, you need to carry out some checking and inspection exercises. Firstly, if you notice a water leak, even if the valve seat is in good shape, you should always replace it. To be sure of this, you can close the sink drain. This would prevent you from losing the fasteners. Then you can open the handle of your tap. This will give you access to the various seals on the tap. You can then unscrew the handle and go through it. If you do this, you can remove the handle very easily without damaging it. You can find more info here. When you have managed to remove the handle from the tap, you can check the tap for cracks. If you find any, it means that the seat of your shower faucet is defective and you should change it. On the other hand, you must be careful not to lose any defects or break any accessories during the checking phase.

Changing the seal or valve seat

To replace the valve seat, you need to follow some steps. The first thing to do is to turn off the water supply. Next, you will open the tap to let out the water that has remained in the wall. When it is time to change the part, you would only need to unscrew the head of the tap, remove the faulty seal and replace with a new one. Finally, you need to provide tools such as a screwdriver, pliers and a brush.